Increased power and fuel economy, while reducing exhaust gas temps and sooty, black smoke. Exclusive 5 inch bellows accommodates engine movement and prevents component damage.
The Banks Ram-Air Intake System delivers exceptional airflow and air density. Its large cotton gauze air filter requires fewer cleanings than competitive filters (stock's small paper filter is not reusable). With its giant 7-1/8" outlet, streamlined components and enclosed cold-air box that keeps hot engine air out of the intake, the Ram-Air flows up to 48% better than stock. Improves power and fuel economy; lowers exhaust gas temps and reduces black smoke. (An indicator of unburned fuel, black smoke is power you can see but not use!)
And Banks' unique 5" bellows accommodate engine movement, which prevents component damage and prolongs service life.
7 out of 8 “cold air” systems actually increase temperatures above stock levels at the turbo inlet!
It’s good to be dense, all right. Check out our density ad for an informative look at intake airflow, air temperature and air density, and how they all come together in the Banks Ram-Air Intake.
Testing so good, it’s patented! Banks sets uncompromisingly high standards for testing. In fact, we were awarded an Engine Performance Evaluation patent from the United States Patent and Trademark Office. Check it out: Engine Performance Evaluation: US Patent # 7,254,477
Note: This illustration shows a stock LLY intake so yours may not be identical.
We measured each intake’s effect on air density at the turbo compressor inlet. Intake temperatures will generally be higher than ambient conditions, but the more the system can duct cool air to the filter and preserve the cool temperature as the air is ducted to the turbo, the higher the air density will be. In addition, there will commonly be a pressure drop as air travels through the filter and the ducting due to any restriction that is introduced. If the design of the system can minimise the restriction and the pressure loss, air density will be preserved.
A 2006 Chevrolet 2500HD, 4 wheel drive, with a crew cab, six foot bed and automatic transmission was used as the test vehicle. A data acquisition system was used to measure vehicle speed via GPS, along with multiple temperature thermistors and extremely accurate pressure transducers. The total vehicle weight was approximately 19,000 lbs. Tests were run in 2WD.
Testing was conducted on a moderate hill on the northbound CA-57 in the city of Pomona. Speed was maintained at 45 MPH until the vehicle was adjacent to a pre-determined start point on the road. At that point, the accelerator was fully depressed and the vehicle was allowed to accelerate while climbing the hill. Test data was observed at the same vehicle speed in all cases, with the engine at 2800 RPM, the point of peak engine power. This data point occurred between 60 and 90 seconds into the run—sufficient time to allow the engine to reach a stabilized operating condition.
Why on earth would anyone pay money for a product that kills power and mileage? It’s all about density — and Banks Ram-Air delivers.
NEW FILTER OPTIONS! Choose from the traditional red, oiled filter or the all-new black, dry filter. Plus, you can even get an extra layer of filtration protection by adding a pre-filter to your order.
Read more about developing and testing the LML intake!
LML
Duramax—Could it ever be better?
Oiled or Dry Filter, Cold Air Intake System
2006-2007 Chevy/GMC 2500/3500 6.6L Duramax
Gain up to +39hp/+69lb-ft, 48% Less Restrictive
Lowers EGT and soot output
Increased power and fuel economy, while reducing exhaust gas temps and sooty, black smoke. Exclusive 5 inch bellows accommodates engine movement and prevents component damage.
The Banks Ram-Air Intake System delivers exceptional airflow and air density. Its large cotton gauze air filter requires fewer cleanings than competitive filters (stock's small paper filter is not reusable). With its giant 7-1/8" outlet, streamlined components and enclosed cold-air box that keeps hot engine air out of the intake, the Ram-Air flows up to 48% better than stock. Improves power and fuel economy; lowers exhaust gas temps and reduces black smoke. (An indicator of unburned fuel, black smoke is power you can see but not use!)
And Banks' unique 5" bellows accommodate engine movement, which prevents component damage and prolongs service life.
7 out of 8 “cold air” systems actually increase temperatures above stock levels at the turbo inlet!
It’s good to be dense, all right. Check out our density ad for an informative look at intake airflow, air temperature and air density, and how they all come together in the Banks Ram-Air Intake.
Testing so good, it’s patented! Banks sets uncompromisingly high standards for testing. In fact, we were awarded an Engine Performance Evaluation patent from the United States Patent and Trademark Office. Check it out: Engine Performance Evaluation: US Patent # 7,254,477
Note: This illustration shows a stock LLY intake so yours may not be identical.
We measured each intake’s effect on air density at the turbo compressor inlet. Intake temperatures will generally be higher than ambient conditions, but the more the system can duct cool air to the filter and preserve the cool temperature as the air is ducted to the turbo, the higher the air density will be. In addition, there will commonly be a pressure drop as air travels through the filter and the ducting due to any restriction that is introduced. If the design of the system can minimise the restriction and the pressure loss, air density will be preserved.
A 2006 Chevrolet 2500HD, 4 wheel drive, with a crew cab, six foot bed and automatic transmission was used as the test vehicle. A data acquisition system was used to measure vehicle speed via GPS, along with multiple temperature thermistors and extremely accurate pressure transducers. The total vehicle weight was approximately 19,000 lbs. Tests were run in 2WD.
Testing was conducted on a moderate hill on the northbound CA-57 in the city of Pomona. Speed was maintained at 45 MPH until the vehicle was adjacent to a pre-determined start point on the road. At that point, the accelerator was fully depressed and the vehicle was allowed to accelerate while climbing the hill. Test data was observed at the same vehicle speed in all cases, with the engine at 2800 RPM, the point of peak engine power. This data point occurred between 60 and 90 seconds into the run—sufficient time to allow the engine to reach a stabilized operating condition.
Why on earth would anyone pay money for a product that kills power and mileage? It’s all about density — and Banks Ram-Air delivers.
NEW FILTER OPTIONS! Choose from the traditional red, oiled filter or the all-new black, dry filter. Plus, you can even get an extra layer of filtration protection by adding a pre-filter to your order.
Read more about developing and testing the LML intake!
LML
Duramax—Could it ever be better?
Overall rating: 4.8944955 / 5 from 218 reviews.
The Banks Ram-Air® enhances truck performance, offering noticeable improvements in power, fuel economy, and reduced exhaust gas temperatures. Customers appreciate its quality, fit, and ease of installation, along with its great airflow and sound.
Review topics: ["fit","instructions","looks","install","service","quality","sound","issues","difference","performance","improvement","shipping","fitment","customer service","power","works","exhaust","finish","design","air intake","feel","air","truck","scoop","throttle response","intake","banks","noticed","filter","temps"].
"Banks does not disappoint, I bought the ram air cold air intake for my 2003 Chevrolet Silverado 3500 Duramax and it was a very well thought out kit everything went together easy and the quality of the parts is outstanding! You can't go wrong with Banks."
"I replaced a K&N cold air intake… Banks made it look like junk! Banks was designed for my vehicle, installation was easy with their clear instructions and photos… everything was perfect. I took the truck for a drive and was amazed at the difference in response! If you’re looking for a cold air intake system, Banks is the way to go… Just do it, you won’t be disappointed."
"Design good. Install fairly simple. Computer does not like it and sends codes within 150 miles after install. And no fix for it besides erasing after engine light comes on. I have the pedal Monster installed and it trips the code even faster. Never had the issue on OEM intake w pedal monster. Would love to find a fix so I don’t have to remove the banks cold air intake. Hope to get answers. Thanks."
"Huge difference (possibly because there was a mouse nest under my stock filter but let's not focus on that). I wanted more whistley noise and got it. I installed a straight pipe first, drove it for a week, then installed the banks intake on my LLY Duramax, and got more whistley noise as hoped for."
"I just installed this on my 2002 Chevy 2500HD Duramax and all I can say is WOW! Well worth the money, noticeable power gains through the entire RPM range. EGTs are lower as well. I haven’t got a chance to calculate fuel efficiency but I’m sure there will be gains there as well…… as long as I can keep my foot out of it. I’ve already got straight pipes, custom tune and FASS fuel system but still had the stock air intake. This intake system truly unlocked the potential that was left lying on the table while using the stock system. VERY happy and VERY impressed. Gale Banks is an engineering genius."
"So glad I chose Banks!!! The only way to go!!!"
"This cold air intake was very easy to install and took less than an hour to complete. Banks has been a leader in diesel engineering for years before the competition. I am looking forward to purchasing other Banks products for my Chevy 2012 LML"
"Very impressed with it like the throttle response that it adds figuring up I'm gained about a mile per gallon Really wish I would have done this sooner Very simple to install"
"quality product,simple install"
"Excellent products and excellent service"
Your cart is currently empty.
To proceed, please confirm if you would like to add another one into your cart.
To proceed, please confirm if you would like to add another one into your cart.
To proceed, please confirm if you would like to add this item into your cart without checking for compatibility. Otherwise, you can search for your vehicle configuration to see if it is compatible with this part.
