Protect your Cummins 6.7's MAP sensor from dirty exhaust gas and sticky oil buildup with a Banks MAP Sensor Relocation Kit. A contaminated sensor can cause inaccurate readings, adversely affecting fuel economy and power output. The small billet aluminum device relocates the sensor out of the soot-filled exhaust stream.
Your engine’s EGR (Exhaust Gas Recirculation) and PCV (Positive Crank Case Ventilation) systems draw unburnt exhaust gasses and oil vapor into the combustion chambers to lower combustion temperature, reduce NOx, and keep harmful gasses from entering the atmosphere.
This recirculated exhaust gas and sticky oil vapor adheres to the MAP sensor’s delicate electronics causing inaccurate readings. This results in incorrect fuel calculations reducing fuel economy and power output.
Banks MAP Spacer Relocation Kit is an attractive, easy way to prevent this oily soot from building on your MAP sensor by relocating it up and out of the contaminated exhaust stream.
Requiring only a minute or two to install, Banks MAP Sensor Relocation Kit eliminates the need for periodic cleaning. It protects your sensor from faulty readings, ensuring proper air-fuel ratios are always calculated by your Cummins ECM.
With a machined logo, show your Banks pride while extending your sensor's cleaning or replacement intervals.
MAP Sensor Relocator
2019-2024 Dodge/RAM 2500-3500 6.7L Diesel
4500-5500 Chassis Cab See Fitment Note
Extends MAP sensor life
Protects sensor from soot buildup
Protect your Cummins 6.7's MAP sensor from dirty exhaust gas and sticky oil buildup with a Banks MAP Sensor Relocation Kit. A contaminated sensor can cause inaccurate readings, adversely affecting fuel economy and power output. The small billet aluminum device relocates the sensor out of the soot-filled exhaust stream.
Your engine’s EGR (Exhaust Gas Recirculation) and PCV (Positive Crank Case Ventilation) systems draw unburnt exhaust gasses and oil vapor into the combustion chambers to lower combustion temperature, reduce NOx, and keep harmful gasses from entering the atmosphere.
This recirculated exhaust gas and sticky oil vapor adheres to the MAP sensor’s delicate electronics causing inaccurate readings. This results in incorrect fuel calculations reducing fuel economy and power output.
Banks MAP Spacer Relocation Kit is an attractive, easy way to prevent this oily soot from building on your MAP sensor by relocating it up and out of the contaminated exhaust stream.
Requiring only a minute or two to install, Banks MAP Sensor Relocation Kit eliminates the need for periodic cleaning. It protects your sensor from faulty readings, ensuring proper air-fuel ratios are always calculated by your Cummins ECM.
With a machined logo, show your Banks pride while extending your sensor's cleaning or replacement intervals.
Overall rating: 4.9333334 / 5 from 30 reviews.
The MAP Sensor Relocation Kit offers high-quality protection for your Cummins 6.7's MAP sensor, preventing contamination from dirty exhaust gas and sticky oil buildup. Customers praised its easy installation and the significant improvement it brings to fuel economy and power output.
Review topics: ["fit","instructions","quality","install","finish","kit","banks","sensor","housing","parts","choice","machining","check engine light"].
"Easy install. With only 50K miles of mostly towing, my sensor wasn't too bad when I pulled it out, but it was definitely starting to get caked up with soot. Cleaned it off and reinstalled on my monster ram with the relocation kit and no issues."
"all your products have been fantastic!! This package came torn open and the box crushed and open. Cant believe Fed Ex would leave that at my door in that condition. The relocate wire wasnt in the package and it is listed on the bill. Can you resend one please!!"
"Nice little housing keeps the sensor out of the dirty soot flow but reads the pressure just as good, another genius invention from Banks."
"Very easy to do."
"I’ve never been to impressed with the kit since every time you floor your truck or tow anything the check engine light comes on. Well I installed the relocation kit yesterday I drove the truck today and tried to get the light on. I put the Banks Powerpack bundle kit on my truck with 5000 miles on it and have been very flusterated at the kit with the check engine light always coming on. This sensor relocation kit seems to be working. I’m looking forward to seeing how the whole power pack kit works now . This seems to be something that needs to be included with the power pack kit ."
"Awesome choice put that map sensor out of The way, so no more soot can get on it. I also have the banks intake installed this map sensor relocation on it. It was a smart choice. Motor runs so much better. Instructions simple to read easy to follow only took minutes to install. Great quality."
"Really easy to install and my sensor came really fast. Literally took 5 mins to install after I cleaned the sensor. I love banks products."
"Purchased the sensor relocation kit. Will install tomorrow. I berths will solve the issue of the sensor clogging up. The part is machined very well. The quality appears to be excellent."
"Impressed with quality"
"Unit appears to be well built. Very easy to install."
Your cart is currently empty.
To proceed, please confirm if you would like to add another one into your cart.
To proceed, please confirm if you would like to add another one into your cart.
To proceed, please confirm if you would like to add this item into your cart without checking for compatibility. Otherwise, you can search for your vehicle configuration to see if it is compatible with this part.
