Overall rating: 4.78125 / 5 from 96 reviews.

AI Generated Review Summary

The AutoMind 2 Programmer by Banks is praised for its ease of use, significant power increase, and improved vehicle performance. Customers appreciate the firm shifts and enhanced driving experience, though feedback on fuel economy varies. Diagnostic capabilities and pre-loaded power make it a ready-to-use solution for service technicians.

Summary topics

• Gas Mileage: 6%
• Performance Difference: 8%
• Tuner Performance: 27%
• Vehicle Improvement: 7%
• Programmer Ease of Use: 18%

Review topics: ["difference","tuner","truck","points","pedal","mileage"].

Review highlights

• "I definitely recommend this tuner it has made a huge difference in power and the shifting is a lot better!" — TJ A.
• "I only drive short distances but it seems to have improved fuel economy around 2 mpg." — Jason B.
• "I could tell a big difference with the firmer shifts." — Peter S.

Reviews

Q&A

can i use the automind with the derringer tuner installed.

Unfortunately, they cannot be stacked.

Will the auto mind read EGT's on a 2004 6.0

It wont be able to read it. Most vehicles pre-2008 don't report back EGT information.

I have 2 different trucks I want to tune. 2011 f150 and a 2017 f150, can use the tuner on both trucks at the same time?

Automind will tune only one truck at a time. It cannot tune multiple vehicles.

Will this work with other Aftermarket add-ons from other companies like Cold Air Intake? If so, will it compensate for new MAF values?

Yes, the AutoMind 2 tuner works great with all aftermarket intake systems because the truck's ECM is still free to make MAF adjustments as necessary.

I just bought the programmer today and was reading through the manual before it got delivered. How do I know my truck wasn’t tuned by the previous owner? Should I just go ahead and get it reflashed? It is a 1999 7.3L with a 2000 motor. No obvious tune IMO, it is very unresponsive and does not seem like the shift points are altered but I’m not ABSOLUTELY sure.

The easiest way to tell if the truck was tuned it to have your local dealer give it a good once over. If needed, they can reflash the ECM to stock.

Overall rating: 4.78125 / 5 from 96 reviews.

AI Generated Review Summary

The AutoMind 2 Programmer by Banks is praised for its ease of use, significant power increase, and improved vehicle performance. Customers appreciate the firm shifts and enhanced driving experience, though feedback on fuel economy varies. Diagnostic capabilities and pre-loaded power make it a ready-to-use solution for service technicians.

Summary topics

• Gas Mileage: 6%
• Performance Difference: 8%
• Tuner Performance: 27%
• Vehicle Improvement: 7%
• Programmer Ease of Use: 18%

Review topics: ["difference","tuner","truck","points","pedal","mileage"].

Review highlights

• "I definitely recommend this tuner it has made a huge difference in power and the shifting is a lot better!" — TJ A.
• "I only drive short distances but it seems to have improved fuel economy around 2 mpg." — Jason B.
• "I could tell a big difference with the firmer shifts." — Peter S.

Reviews

Q&A

can i use the automind with the derringer tuner installed.

Unfortunately, they cannot be stacked.

Will the auto mind read EGT's on a 2004 6.0

It wont be able to read it. Most vehicles pre-2008 don't report back EGT information.

I have 2 different trucks I want to tune. 2011 f150 and a 2017 f150, can use the tuner on both trucks at the same time?

Automind will tune only one truck at a time. It cannot tune multiple vehicles.

Will this work with other Aftermarket add-ons from other companies like Cold Air Intake? If so, will it compensate for new MAF values?

Yes, the AutoMind 2 tuner works great with all aftermarket intake systems because the truck's ECM is still free to make MAF adjustments as necessary.

I just bought the programmer today and was reading through the manual before it got delivered. How do I know my truck wasn’t tuned by the previous owner? Should I just go ahead and get it reflashed? It is a 1999 7.3L with a 2000 motor. No obvious tune IMO, it is very unresponsive and does not seem like the shift points are altered but I’m not ABSOLUTELY sure.

The easiest way to tell if the truck was tuned it to have your local dealer give it a good once over. If needed, they can reflash the ECM to stock.

Overall rating: 4.78125 / 5 from 96 reviews.

AI Generated Review Summary

The AutoMind 2 Programmer by Banks is praised for its ease of use, significant power increase, and improved vehicle performance. Customers appreciate the firm shifts and enhanced driving experience, though feedback on fuel economy varies. Diagnostic capabilities and pre-loaded power make it a ready-to-use solution for service technicians.

Summary topics

• Gas Mileage: 6%
• Performance Difference: 8%
• Tuner Performance: 27%
• Vehicle Improvement: 7%
• Programmer Ease of Use: 18%

Review topics: ["difference","tuner","truck","points","pedal","mileage"].

Review highlights

• "I definitely recommend this tuner it has made a huge difference in power and the shifting is a lot better!" — TJ A.
• "I only drive short distances but it seems to have improved fuel economy around 2 mpg." — Jason B.
• "I could tell a big difference with the firmer shifts." — Peter S.

Reviews

Q&A

can i use the automind with the derringer tuner installed.

Unfortunately, they cannot be stacked.

Will the auto mind read EGT's on a 2004 6.0

It wont be able to read it. Most vehicles pre-2008 don't report back EGT information.

I have 2 different trucks I want to tune. 2011 f150 and a 2017 f150, can use the tuner on both trucks at the same time?

Automind will tune only one truck at a time. It cannot tune multiple vehicles.

Will this work with other Aftermarket add-ons from other companies like Cold Air Intake? If so, will it compensate for new MAF values?

Yes, the AutoMind 2 tuner works great with all aftermarket intake systems because the truck's ECM is still free to make MAF adjustments as necessary.

I just bought the programmer today and was reading through the manual before it got delivered. How do I know my truck wasn’t tuned by the previous owner? Should I just go ahead and get it reflashed? It is a 1999 7.3L with a 2000 motor. No obvious tune IMO, it is very unresponsive and does not seem like the shift points are altered but I’m not ABSOLUTELY sure.

The easiest way to tell if the truck was tuned it to have your local dealer give it a good once over. If needed, they can reflash the ECM to stock.

Overall rating: 4.78125 / 5 from 96 reviews.

AI Generated Review Summary

The AutoMind 2 Programmer by Banks is praised for its ease of use, significant power increase, and improved vehicle performance. Customers appreciate the firm shifts and enhanced driving experience, though feedback on fuel economy varies. Diagnostic capabilities and pre-loaded power make it a ready-to-use solution for service technicians.

Summary topics

• Gas Mileage: 6%
• Performance Difference: 8%
• Tuner Performance: 27%
• Vehicle Improvement: 7%
• Programmer Ease of Use: 18%

Review topics: ["difference","tuner","truck","points","pedal","mileage"].

Review highlights

• "I definitely recommend this tuner it has made a huge difference in power and the shifting is a lot better!" — TJ A.
• "I only drive short distances but it seems to have improved fuel economy around 2 mpg." — Jason B.
• "I could tell a big difference with the firmer shifts." — Peter S.

Reviews

Q&A

can i use the automind with the derringer tuner installed.

Unfortunately, they cannot be stacked.

Will the auto mind read EGT's on a 2004 6.0

It wont be able to read it. Most vehicles pre-2008 don't report back EGT information.

I have 2 different trucks I want to tune. 2011 f150 and a 2017 f150, can use the tuner on both trucks at the same time?

Automind will tune only one truck at a time. It cannot tune multiple vehicles.

Will this work with other Aftermarket add-ons from other companies like Cold Air Intake? If so, will it compensate for new MAF values?

Yes, the AutoMind 2 tuner works great with all aftermarket intake systems because the truck's ECM is still free to make MAF adjustments as necessary.

I just bought the programmer today and was reading through the manual before it got delivered. How do I know my truck wasn’t tuned by the previous owner? Should I just go ahead and get it reflashed? It is a 1999 7.3L with a 2000 motor. No obvious tune IMO, it is very unresponsive and does not seem like the shift points are altered but I’m not ABSOLUTELY sure.

The easiest way to tell if the truck was tuned it to have your local dealer give it a good once over. If needed, they can reflash the ECM to stock.

Overall rating: 4.78125 / 5 from 96 reviews.

AI Generated Review Summary

The AutoMind 2 Programmer by Banks is praised for its ease of use, significant power increase, and improved vehicle performance. Customers appreciate the firm shifts and enhanced driving experience, though feedback on fuel economy varies. Diagnostic capabilities and pre-loaded power make it a ready-to-use solution for service technicians.

Summary topics

• Gas Mileage: 6%
• Performance Difference: 8%
• Tuner Performance: 27%
• Vehicle Improvement: 7%
• Programmer Ease of Use: 18%

Review topics: ["difference","tuner","truck","points","pedal","mileage"].

Review highlights

• "I definitely recommend this tuner it has made a huge difference in power and the shifting is a lot better!" — TJ A.
• "I only drive short distances but it seems to have improved fuel economy around 2 mpg." — Jason B.
• "I could tell a big difference with the firmer shifts." — Peter S.

Reviews

Q&A

can i use the automind with the derringer tuner installed.

Unfortunately, they cannot be stacked.

Will the auto mind read EGT's on a 2004 6.0

It wont be able to read it. Most vehicles pre-2008 don't report back EGT information.

I have 2 different trucks I want to tune. 2011 f150 and a 2017 f150, can use the tuner on both trucks at the same time?

Automind will tune only one truck at a time. It cannot tune multiple vehicles.

Will this work with other Aftermarket add-ons from other companies like Cold Air Intake? If so, will it compensate for new MAF values?

Yes, the AutoMind 2 tuner works great with all aftermarket intake systems because the truck's ECM is still free to make MAF adjustments as necessary.

I just bought the programmer today and was reading through the manual before it got delivered. How do I know my truck wasn’t tuned by the previous owner? Should I just go ahead and get it reflashed? It is a 1999 7.3L with a 2000 motor. No obvious tune IMO, it is very unresponsive and does not seem like the shift points are altered but I’m not ABSOLUTELY sure.

The easiest way to tell if the truck was tuned it to have your local dealer give it a good once over. If needed, they can reflash the ECM to stock.

Overall rating: 4.78125 / 5 from 96 reviews.

AI Generated Review Summary

The AutoMind 2 Programmer by Banks is praised for its ease of use, significant power increase, and improved vehicle performance. Customers appreciate the firm shifts and enhanced driving experience, though feedback on fuel economy varies. Diagnostic capabilities and pre-loaded power make it a ready-to-use solution for service technicians.

Summary topics

• Gas Mileage: 6%
• Performance Difference: 8%
• Tuner Performance: 27%
• Vehicle Improvement: 7%
• Programmer Ease of Use: 18%

Review topics: ["difference","tuner","truck","points","pedal","mileage"].

Review highlights

• "I definitely recommend this tuner it has made a huge difference in power and the shifting is a lot better!" — TJ A.
• "I only drive short distances but it seems to have improved fuel economy around 2 mpg." — Jason B.
• "I could tell a big difference with the firmer shifts." — Peter S.

Reviews

Q&A

can i use the automind with the derringer tuner installed.

Unfortunately, they cannot be stacked.

Will the auto mind read EGT's on a 2004 6.0

It wont be able to read it. Most vehicles pre-2008 don't report back EGT information.

I have 2 different trucks I want to tune. 2011 f150 and a 2017 f150, can use the tuner on both trucks at the same time?

Automind will tune only one truck at a time. It cannot tune multiple vehicles.

Will this work with other Aftermarket add-ons from other companies like Cold Air Intake? If so, will it compensate for new MAF values?

Yes, the AutoMind 2 tuner works great with all aftermarket intake systems because the truck's ECM is still free to make MAF adjustments as necessary.

I just bought the programmer today and was reading through the manual before it got delivered. How do I know my truck wasn’t tuned by the previous owner? Should I just go ahead and get it reflashed? It is a 1999 7.3L with a 2000 motor. No obvious tune IMO, it is very unresponsive and does not seem like the shift points are altered but I’m not ABSOLUTELY sure.

The easiest way to tell if the truck was tuned it to have your local dealer give it a good once over. If needed, they can reflash the ECM to stock.